Shimano Antares DC MD HG Line Capacity & Reel Setup Guide

$0.00
Shimano Antares DC MD HG baitcasting reel

ReelCalc Reel Setup Guide

Shimano Antares DC MD HG Line Capacity & Reel Setup Guide

Built around a heavy-duty frame, the Shimano Antares DC MD HG (046017) is intended for bass, swimbaits, frogs, heavy cover, and larger lures. This page follows the exact Japanese-market 046017 specifications rather than a similarly named U.S. model. MGL Spool III uses a low-inertia spool to improve startup and casting control, while 4x8 DC MD Tune uses digitally controlled braking tuned for heavier lures and changing casting conditions. Its 34.6-inch pickup is the versatile middle ground for jigs, soft plastics, topwater, and moving baits.

Quick Answer: Best Line for the Shimano Antares DC MD HG

Best overall range: 40-80 lb braid

Simple alternative: 15-25 lb mono/fluoro

For a versatile starting point, use 15-25 lb mono/fluoro as a straight main line or 40-80 lb braid with a leader matched to the cover and lure. A short mono base can prevent braid slip and reduce how much premium line is needed.

Open this exact reel in the Reel Setup Wizard.

Who Is the Shimano Antares DC MD HG For?

This baitcaster makes the most sense for anglers fishing bass, swimbaits, frogs, heavy cover, and larger lures. Its spool holds practical casting-line amounts without the bulk of a deep conventional reel. Use 15-25 lb mono/fluoro for a straightforward main line, or 40-80 lb braid when you want more strength for the same diameter and can manage braid carefully on the spool.

Use the Pre-Loaded Shimano Antares DC MD HG ReelCalc Calculator

This calculator is pre-loaded for the exact Shimano Antares DC MD HG. Choose the actual line you plan to spool and ReelCalc automatically uses the appropriate published mono or braid capacity. In backing mode, the suggested main-line amount adjusts when needed to leave practical room for backing. The 34.6-inch retrieve is also loaded for the handle-turn estimate.

Best Line Setup for the Shimano Antares DC MD HG

A practical starting point for the Shimano Antares DC MD HG is 40 lb braid over monofilament backing with a 15-25 lb mono/fluoro leader. A short mono base can prevent braid from slipping and can reduce how much premium line is needed, but this compact spool does not require a large backing layer. Since two lines with the same pound-test label can have different diameters, use the listed diameter of the exact line whenever it is available.

Fishing UseSuggested Line Setup
Bass40-60 lb braid with a 15-25 lb mono/fluoro leader
Swimbaits60-80 lb braid
Frogs60-80 lb braid
Heavy Cover60-80 lb braid
Straight-line setup15-25 lb mono/fluoro

Shimano Antares DC MD HG Line Capacity

Shimano lists the monofilament capacities as 14 lb / 158.6 yards, 16 lb / 131.2 yards, 20 lb / 109.4 yards. These factory ratings establish the spool's baseline, while the calculator adjusts the estimate for the diameter of the line you select.

Line TypeLine RatingCapacity
Monofilament14 lb158.6 yards
Monofilament16 lb131.2 yards
Monofilament20 lb109.4 yards

Shimano Antares DC MD HG Specs

The Shimano Antares DC MD HG uses a 7.4:1 gear ratio. Its 34.6-inch pickup is the versatile middle ground for jigs, soft plastics, topwater, and moving baits. It weighs 8.29 oz and has a published maximum drag of 13.2 lb. Maximum drag is the reel's upper rating, not a suggestion to fish every setup at that setting.

SpecificationShimano Antares DC MD HG
Exact model046017
Reel sizeHG
Retrieve handLeft
Gear ratio7.4:1
Line retrieve34.6 inches per crank
Weight8.29 oz
Maximum drag13.2 lb
Bearings11/1
Mono capacity14 lb / 158.6 yards, 16 lb / 131.2 yards, 20 lb / 109.4 yards
Braid capacityNot published in the trusted record

Specifications checked against Shimano's official Japanese product specifications.

Shimano Antares DC MD HG FAQs

What Size Braid Is Best for the Shimano Antares DC MD HG?

40-80 lb braid is the practical ReelCalc range for this baitcaster. Use the lighter end for open water and easier casting, and the stronger end around vegetation, docks, wood, frogs, or larger baits. Avoid choosing very thin braid only to maximize yardage because thin braid can dig into a baitcaster spool under load.

How Much Line Does the Shimano Antares DC MD HG Hold?

The reel is published at 14 lb / 158.6 yards, 16 lb / 131.2 yards, 20 lb / 109.4 yards. Actual capacity can vary with the diameter of the exact line selected.

Build Your Shimano Antares DC MD HG Line Setup

Open the Reel Setup Wizard with this exact reel already selected for a guided line and backing recommendation.

Shimano Antares DC MD HG baitcasting reel

ReelCalc Reel Setup Guide

Shimano Antares DC MD HG Line Capacity & Reel Setup Guide

Built around a heavy-duty frame, the Shimano Antares DC MD HG (046017) is intended for bass, swimbaits, frogs, heavy cover, and larger lures. This page follows the exact Japanese-market 046017 specifications rather than a similarly named U.S. model. MGL Spool III uses a low-inertia spool to improve startup and casting control, while 4x8 DC MD Tune uses digitally controlled braking tuned for heavier lures and changing casting conditions. Its 34.6-inch pickup is the versatile middle ground for jigs, soft plastics, topwater, and moving baits.

Quick Answer: Best Line for the Shimano Antares DC MD HG

Best overall range: 40-80 lb braid

Simple alternative: 15-25 lb mono/fluoro

For a versatile starting point, use 15-25 lb mono/fluoro as a straight main line or 40-80 lb braid with a leader matched to the cover and lure. A short mono base can prevent braid slip and reduce how much premium line is needed.

Open this exact reel in the Reel Setup Wizard.

Who Is the Shimano Antares DC MD HG For?

This baitcaster makes the most sense for anglers fishing bass, swimbaits, frogs, heavy cover, and larger lures. Its spool holds practical casting-line amounts without the bulk of a deep conventional reel. Use 15-25 lb mono/fluoro for a straightforward main line, or 40-80 lb braid when you want more strength for the same diameter and can manage braid carefully on the spool.

Use the Pre-Loaded Shimano Antares DC MD HG ReelCalc Calculator

This calculator is pre-loaded for the exact Shimano Antares DC MD HG. Choose the actual line you plan to spool and ReelCalc automatically uses the appropriate published mono or braid capacity. In backing mode, the suggested main-line amount adjusts when needed to leave practical room for backing. The 34.6-inch retrieve is also loaded for the handle-turn estimate.

Best Line Setup for the Shimano Antares DC MD HG

A practical starting point for the Shimano Antares DC MD HG is 40 lb braid over monofilament backing with a 15-25 lb mono/fluoro leader. A short mono base can prevent braid from slipping and can reduce how much premium line is needed, but this compact spool does not require a large backing layer. Since two lines with the same pound-test label can have different diameters, use the listed diameter of the exact line whenever it is available.

Fishing UseSuggested Line Setup
Bass40-60 lb braid with a 15-25 lb mono/fluoro leader
Swimbaits60-80 lb braid
Frogs60-80 lb braid
Heavy Cover60-80 lb braid
Straight-line setup15-25 lb mono/fluoro

Shimano Antares DC MD HG Line Capacity

Shimano lists the monofilament capacities as 14 lb / 158.6 yards, 16 lb / 131.2 yards, 20 lb / 109.4 yards. These factory ratings establish the spool's baseline, while the calculator adjusts the estimate for the diameter of the line you select.

Line TypeLine RatingCapacity
Monofilament14 lb158.6 yards
Monofilament16 lb131.2 yards
Monofilament20 lb109.4 yards

Shimano Antares DC MD HG Specs

The Shimano Antares DC MD HG uses a 7.4:1 gear ratio. Its 34.6-inch pickup is the versatile middle ground for jigs, soft plastics, topwater, and moving baits. It weighs 8.29 oz and has a published maximum drag of 13.2 lb. Maximum drag is the reel's upper rating, not a suggestion to fish every setup at that setting.

SpecificationShimano Antares DC MD HG
Exact model046017
Reel sizeHG
Retrieve handLeft
Gear ratio7.4:1
Line retrieve34.6 inches per crank
Weight8.29 oz
Maximum drag13.2 lb
Bearings11/1
Mono capacity14 lb / 158.6 yards, 16 lb / 131.2 yards, 20 lb / 109.4 yards
Braid capacityNot published in the trusted record

Specifications checked against Shimano's official Japanese product specifications.

Shimano Antares DC MD HG FAQs

What Size Braid Is Best for the Shimano Antares DC MD HG?

40-80 lb braid is the practical ReelCalc range for this baitcaster. Use the lighter end for open water and easier casting, and the stronger end around vegetation, docks, wood, frogs, or larger baits. Avoid choosing very thin braid only to maximize yardage because thin braid can dig into a baitcaster spool under load.

How Much Line Does the Shimano Antares DC MD HG Hold?

The reel is published at 14 lb / 158.6 yards, 16 lb / 131.2 yards, 20 lb / 109.4 yards. Actual capacity can vary with the diameter of the exact line selected.

Build Your Shimano Antares DC MD HG Line Setup

Open the Reel Setup Wizard with this exact reel already selected for a guided line and backing recommendation.