Okuma ITX-CB 3000 Line Capacity & Reel Setup Guide
ReelCalc Reel Setup Guide
Okuma ITX-CB 3000 Line Capacity & Reel Setup Guide
The Okuma ITX-CB 3000 (ICB-3000HA) is a 3000-size fishing reel suited to bass, walleye, and all-around spinning. At 7.9 oz with 33.5 inches of line pickup per handle turn, it offers a useful balance of manageable size and quick line recovery for everyday spinning setups.
Quick Answer: Best Line for the Okuma ITX-CB 3000
Best overall range: 10-20 lb braid
Simple alternative: 8-10 lb mono/fluoro
For most anglers, start with 10-20 lb braid and add an 8-10 lb leader matched to the water and target species. A straightforward alternative is 8-10 lb mono/fluoro. Using more backing can reduce how much premium line you need.
Who Is the Okuma ITX-CB 3000 For?
This reel makes the most sense for anglers fishing bass, walleye, and all-around spinning. Its published capacity gives you room to choose between a simple 8-10 lb mono/fluoro setup or a thinner 10-20 lb braid setup with a leader. That flexibility is useful when the same reel may see light presentations one day and stronger fish or mixed cover the next.
Use the Pre-Loaded ITX-CB 3000 ReelCalc Calculator
The calculator below starts with the verified 10 lb / 160 yard reel rating already entered. Its brand-neutral starting setup is 10 lb braid at 150 yards over 10 lb monofilament backing, using a typical braid diameter from ReelCalc's line database. Replace that diameter with the exact line's published diameter whenever it is available. The 33.5-inch retrieve is also loaded for the handle-turn estimate.
Best Line Setup for the Okuma ITX-CB 3000
A practical starting point for the Okuma ITX-CB 3000 is 10 lb braid over monofilament backing with an 8-10 lb leader. Backing lets you put the useful amount of working line on top without filling the entire spool with premium line. Since two lines with the same pound-test label can have different diameters, use the listed diameter of the exact line whenever it is available.
| Fishing Use | Suggested Line Setup |
|---|---|
| Bass | 10-20 lb braid with an 8-10 lb leader |
| Walleye | 15 lb braid with an 8-10 lb leader |
| All-around Spinning | 10 lb braid with an 8-10 lb leader |
| Simple straight-line setup | 8-10 lb mono/fluoro |
Okuma ITX-CB 3000 Line Capacity
Okuma lists the monofilament capacities as 6 lb / 240 yards, 8 lb / 200 yards, 10 lb / 160 yards. The published braid ratings are 160 lb / 30 yards. These factory ratings establish the spool's baseline, while the calculator adjusts the estimate for the diameter of the line you select.
| Line Type | Line Rating | Capacity |
|---|---|---|
| Monofilament | 6 lb | 240 yards |
| Monofilament | 8 lb | 200 yards |
| Monofilament | 10 lb | 160 yards |
| Braid | 160 lb | 30 yards |
Okuma ITX-CB 3000 Specs
The Okuma ITX-CB 3000 uses a 6.0:1 gear ratio and retrieves 33.5 inches per handle turn, which helps pick up slack without making the reel oversized for its intended uses. It weighs 7.9 oz and has a published maximum drag of 18 lb. Maximum drag is the reel's upper rating, not a suggestion to fish every setup at that setting.
| Specification | Okuma ITX-CB 3000 |
|---|---|
| Exact model | ICB-3000HA |
| Reel size | 3000 |
| Gear ratio | 6.0:1 |
| Line retrieve | 33.5 inches per crank |
| Weight | 7.9 oz |
| Maximum drag | 18 lb |
| Bearings | 7HPB+1RB |
| Mono capacity | 6 lb / 240 yards, 8 lb / 200 yards, 10 lb / 160 yards |
| Braid capacity | 160 lb / 30 yards |
Specifications checked against Okuma's official U.S. product specifications.
Okuma ITX-CB 3000 FAQs
What Size Braid Is Best for the Okuma ITX-CB 3000?
10-20 lb braid is the practical ReelCalc range for this reel. Use the lighter end for finesse presentations, trout, and open water. Move toward the stronger end for bass, current, vegetation, or situations where a little more abrasion resistance and control are useful.
How Much Line Does the Okuma ITX-CB 3000 Hold?
The reel is published at 6 lb / 240 yards, 8 lb / 200 yards, 10 lb / 160 yards. Its listed braid ratings are 160 lb / 30 yards. Actual capacity can vary with the diameter of the exact line selected.
Related Reel Pages and ReelCalc Resources
Compare Similar Reels
- Okuma ITX-CB 2500 Line Capacity & Setup Guide
- Okuma ITX-CB 4000 Line Capacity & Setup Guide
- Okuma ITX-CB 1000 Line Capacity & Setup Guide
- Bass Pro Shops Johnny Morris CarbonLite 2.0 Spinning Reel 3000 Line Capacity & Setup Guide
Helpful Resources
Build Your Okuma ITX-CB 3000 Line Setup
Open the Reel Setup Wizard with this exact reel already selected for a guided line and backing recommendation.
Open This Reel in the Setup Wizard
ReelCalc Reel Setup Guide
Okuma ITX-CB 3000 Line Capacity & Reel Setup Guide
The Okuma ITX-CB 3000 (ICB-3000HA) is a 3000-size fishing reel suited to bass, walleye, and all-around spinning. At 7.9 oz with 33.5 inches of line pickup per handle turn, it offers a useful balance of manageable size and quick line recovery for everyday spinning setups.
Quick Answer: Best Line for the Okuma ITX-CB 3000
Best overall range: 10-20 lb braid
Simple alternative: 8-10 lb mono/fluoro
For most anglers, start with 10-20 lb braid and add an 8-10 lb leader matched to the water and target species. A straightforward alternative is 8-10 lb mono/fluoro. Using more backing can reduce how much premium line you need.
Who Is the Okuma ITX-CB 3000 For?
This reel makes the most sense for anglers fishing bass, walleye, and all-around spinning. Its published capacity gives you room to choose between a simple 8-10 lb mono/fluoro setup or a thinner 10-20 lb braid setup with a leader. That flexibility is useful when the same reel may see light presentations one day and stronger fish or mixed cover the next.
Use the Pre-Loaded ITX-CB 3000 ReelCalc Calculator
The calculator below starts with the verified 10 lb / 160 yard reel rating already entered. Its brand-neutral starting setup is 10 lb braid at 150 yards over 10 lb monofilament backing, using a typical braid diameter from ReelCalc's line database. Replace that diameter with the exact line's published diameter whenever it is available. The 33.5-inch retrieve is also loaded for the handle-turn estimate.
Best Line Setup for the Okuma ITX-CB 3000
A practical starting point for the Okuma ITX-CB 3000 is 10 lb braid over monofilament backing with an 8-10 lb leader. Backing lets you put the useful amount of working line on top without filling the entire spool with premium line. Since two lines with the same pound-test label can have different diameters, use the listed diameter of the exact line whenever it is available.
| Fishing Use | Suggested Line Setup |
|---|---|
| Bass | 10-20 lb braid with an 8-10 lb leader |
| Walleye | 15 lb braid with an 8-10 lb leader |
| All-around Spinning | 10 lb braid with an 8-10 lb leader |
| Simple straight-line setup | 8-10 lb mono/fluoro |
Okuma ITX-CB 3000 Line Capacity
Okuma lists the monofilament capacities as 6 lb / 240 yards, 8 lb / 200 yards, 10 lb / 160 yards. The published braid ratings are 160 lb / 30 yards. These factory ratings establish the spool's baseline, while the calculator adjusts the estimate for the diameter of the line you select.
| Line Type | Line Rating | Capacity |
|---|---|---|
| Monofilament | 6 lb | 240 yards |
| Monofilament | 8 lb | 200 yards |
| Monofilament | 10 lb | 160 yards |
| Braid | 160 lb | 30 yards |
Okuma ITX-CB 3000 Specs
The Okuma ITX-CB 3000 uses a 6.0:1 gear ratio and retrieves 33.5 inches per handle turn, which helps pick up slack without making the reel oversized for its intended uses. It weighs 7.9 oz and has a published maximum drag of 18 lb. Maximum drag is the reel's upper rating, not a suggestion to fish every setup at that setting.
| Specification | Okuma ITX-CB 3000 |
|---|---|
| Exact model | ICB-3000HA |
| Reel size | 3000 |
| Gear ratio | 6.0:1 |
| Line retrieve | 33.5 inches per crank |
| Weight | 7.9 oz |
| Maximum drag | 18 lb |
| Bearings | 7HPB+1RB |
| Mono capacity | 6 lb / 240 yards, 8 lb / 200 yards, 10 lb / 160 yards |
| Braid capacity | 160 lb / 30 yards |
Specifications checked against Okuma's official U.S. product specifications.
Okuma ITX-CB 3000 FAQs
What Size Braid Is Best for the Okuma ITX-CB 3000?
10-20 lb braid is the practical ReelCalc range for this reel. Use the lighter end for finesse presentations, trout, and open water. Move toward the stronger end for bass, current, vegetation, or situations where a little more abrasion resistance and control are useful.
How Much Line Does the Okuma ITX-CB 3000 Hold?
The reel is published at 6 lb / 240 yards, 8 lb / 200 yards, 10 lb / 160 yards. Its listed braid ratings are 160 lb / 30 yards. Actual capacity can vary with the diameter of the exact line selected.
Related Reel Pages and ReelCalc Resources
Compare Similar Reels
- Okuma ITX-CB 2500 Line Capacity & Setup Guide
- Okuma ITX-CB 4000 Line Capacity & Setup Guide
- Okuma ITX-CB 1000 Line Capacity & Setup Guide
- Bass Pro Shops Johnny Morris CarbonLite 2.0 Spinning Reel 3000 Line Capacity & Setup Guide
Helpful Resources
Build Your Okuma ITX-CB 3000 Line Setup
Open the Reel Setup Wizard with this exact reel already selected for a guided line and backing recommendation.
Open This Reel in the Setup Wizard