Image 1 of 1
Daiwa Saltiga LD 80-2SPD Line Capacity & Reel Setup Guide
ReelCalc Reel Setup Guide
Daiwa Saltiga LD 80-2SPD Line Capacity & Reel Setup Guide
Daiwa rates the Saltiga LD80-2SPD for 350 yards of 80 lb mono or 700 yards of 120 lb J-Braid. If you plan to fish a mono top shot, leave room for it before winding on the braid. This guide is for the two-speed lever-drag conventional reel, model SAGLD80-2SPD.
Quick Answer: Best Line for the Daiwa Saltiga LD 80-2SPD
Best overall range: 80-130 lb braid
Simple alternative: 60-80 lb mono
Use the J-Braid row for a braid fill and the mono row for straight mono. A top shot uses some of that same space; the two published capacities do not add together.
Who Is the Daiwa Saltiga LD 80-2SPD For?
High gear picks up slack at 48.6 inches per turn; shift to low gear for leverage at 21.6 inches per turn. Neither figure is a capacity rating.
Use the Pre-Loaded Saltiga LD 80-2SPD ReelCalc Calculator
Choose your line to estimate a full spool, or enter a working length to estimate the backing underneath.
Best Line Setup for the Daiwa Saltiga LD 80-2SPD
Pick your working braid and reserve enough room for the mono top shot. Maximum drag is not a recommended fishing setting.
| Fishing Use | Suggested Line Setup |
|---|---|
| Braid under a mono top shot | Size the top shot first and leave room for the connection. |
| Straight mono | Daiwa rates the spool at 350 yards of 80 lb mono. |
Daiwa Saltiga LD 80-2SPD Line Capacity
These are pound-test ratings. Check the diameter on your line box: two lines of the same strength may fill this spool at different yardages.
| Line Type | Line Rating | Capacity |
|---|---|---|
| Monofilament | 80 lb | 350 yards |
| Braid | 120 lb | 700 yards |
| Braid | 150 lb | 550 yards |
Daiwa Saltiga LD 80-2SPD Specs
Specs below follow Daiwa's US product table. Its launch announcement gives 58.4 oz and five CRBB instead of 60 oz and six CRBB. Both sources identify the same model.
| Specification | Daiwa Saltiga LD 80-2SPD |
|---|---|
| Exact model | SAGLD80-2SPD |
| Reel size | 80-2SPD |
| Gear ratio | 3.9:1 high / 1.7:1 low:1 |
| Line retrieve | 48.6 in high gear; 21.6 in low gear |
| Weight | 60 oz |
| Maximum drag | 59.5 lb |
| Bearings | 6 CRBB (US product table) |
| Mono capacity | 80 lb / 350 yd |
| Braid capacity | 120 lb / 700 yd; 150 lb / 550 yd |
Specifications checked against the exact-model manufacturer specifications.
Daiwa Saltiga LD 80-2SPD FAQs
What Size Braid Is Best for the Daiwa Saltiga LD 80-2SPD?
Daiwa gives two J-Braid references: 120 lb for more reserve or 150 lb when strength is the priority. Choose for the rod, rig and fish; the 80 in the model name is not a braid requirement.
How Much Line Does the Daiwa Saltiga LD 80-2SPD Hold?
Use the rated capacity in the table as a starting point. Check the fill level as you wind rather than forcing on the last few yards.
ReelCalc Reel Setup Guide
Daiwa Saltiga LD 80-2SPD Line Capacity & Reel Setup Guide
Daiwa rates the Saltiga LD80-2SPD for 350 yards of 80 lb mono or 700 yards of 120 lb J-Braid. If you plan to fish a mono top shot, leave room for it before winding on the braid. This guide is for the two-speed lever-drag conventional reel, model SAGLD80-2SPD.
Quick Answer: Best Line for the Daiwa Saltiga LD 80-2SPD
Best overall range: 80-130 lb braid
Simple alternative: 60-80 lb mono
Use the J-Braid row for a braid fill and the mono row for straight mono. A top shot uses some of that same space; the two published capacities do not add together.
Who Is the Daiwa Saltiga LD 80-2SPD For?
High gear picks up slack at 48.6 inches per turn; shift to low gear for leverage at 21.6 inches per turn. Neither figure is a capacity rating.
Use the Pre-Loaded Saltiga LD 80-2SPD ReelCalc Calculator
Choose your line to estimate a full spool, or enter a working length to estimate the backing underneath.
Best Line Setup for the Daiwa Saltiga LD 80-2SPD
Pick your working braid and reserve enough room for the mono top shot. Maximum drag is not a recommended fishing setting.
| Fishing Use | Suggested Line Setup |
|---|---|
| Braid under a mono top shot | Size the top shot first and leave room for the connection. |
| Straight mono | Daiwa rates the spool at 350 yards of 80 lb mono. |
Daiwa Saltiga LD 80-2SPD Line Capacity
These are pound-test ratings. Check the diameter on your line box: two lines of the same strength may fill this spool at different yardages.
| Line Type | Line Rating | Capacity |
|---|---|---|
| Monofilament | 80 lb | 350 yards |
| Braid | 120 lb | 700 yards |
| Braid | 150 lb | 550 yards |
Daiwa Saltiga LD 80-2SPD Specs
Specs below follow Daiwa's US product table. Its launch announcement gives 58.4 oz and five CRBB instead of 60 oz and six CRBB. Both sources identify the same model.
| Specification | Daiwa Saltiga LD 80-2SPD |
|---|---|
| Exact model | SAGLD80-2SPD |
| Reel size | 80-2SPD |
| Gear ratio | 3.9:1 high / 1.7:1 low:1 |
| Line retrieve | 48.6 in high gear; 21.6 in low gear |
| Weight | 60 oz |
| Maximum drag | 59.5 lb |
| Bearings | 6 CRBB (US product table) |
| Mono capacity | 80 lb / 350 yd |
| Braid capacity | 120 lb / 700 yd; 150 lb / 550 yd |
Specifications checked against the exact-model manufacturer specifications.
Daiwa Saltiga LD 80-2SPD FAQs
What Size Braid Is Best for the Daiwa Saltiga LD 80-2SPD?
Daiwa gives two J-Braid references: 120 lb for more reserve or 150 lb when strength is the priority. Choose for the rod, rig and fish; the 80 in the model name is not a braid requirement.
How Much Line Does the Daiwa Saltiga LD 80-2SPD Hold?
Use the rated capacity in the table as a starting point. Check the fill level as you wind rather than forcing on the last few yards.