Image 1 of 1
VARIVAS Avani Casting PE Max Power X8
VARIVAS Avani Casting PE Max Power X8
Diameter chart and spool planning guide

VARIVAS Avani Casting PE Max Power X8 is an eight-strand PE braid for offshore lure casting. This guide covers 20.2 to 112 lb.
- Construction
- 8-strand PE braid
- Strength basis
- Maximum lb
- Reviewed sizes
- 10
Published diameters and spool lengths
Manufacturer approximate diameters; PE size is not a measured diameter. Independent measurements are limited to the samples identified here. PE 10 and 12 have no published US diameter and are omitted.
| PE size | Maximum lb | Diameter (in) | Diameter (mm) | Package length |
|---|---|---|---|---|
| 1 | 20.2 | 0.0065 | 0.165 | 300 m |
| 1.2 | 24.1 | 0.0073 | 0.185 | 300 m |
| 1.5 | 28.6 | 0.0081 | 0.205 | 300 m |
| 2 | 33 | 0.0093 | 0.235 | 200 m, 300 m |
| 2.5 | 40 | 0.0102 | 0.260 | 200 m, 300 m |
| 3 | 48 | 0.0112 | 0.285 | 200 m, 300 m |
| 4 | 64 | 0.0130 | 0.330 | 200 m, 300 m, 400 m |
| 5 | 78 | 0.0146 | 0.370 | 200 m, 300 m, 400 m |
| 6 | 85 | 0.0159 | 0.405 | 200 m, 300 m, 400 m |
| 8 | 112 | 0.0185 | 0.470 | 200 m, 300 m, 400 m |
Line Laboratory sample measurements
Each row describes the exact size tested. Lab quoted diameter and measured average are separate from the maker chart and are not used for the capacity estimate.
| Tested size | Lab quoted | Measured average | Source |
|---|---|---|---|
| PE 6 / 85 lb | 0.418 mm | 0.499 mm | Test details (85 lb) |
| PE 8 / 112 lb | 0.47 mm | 0.623 mm | Test details (112 lb) |
Distinguishing standard Casting X8
Look for the white offshore casting line with sight marks every 25 m. At PE 1 its US chart says 0.165 mm, while Shore Master at the same 20.2 lb rating says 0.171 mm. Choose the family before choosing the size.
This guide estimates a full spool from a printed diameter. For optional backing, open the Setup Wizard and enter the line details manually. This link does not preselect a line.
Questions about Avani Casting PE Max Power X8
Which diameter should I enter for PE 6?
The US chart prints 0.405 mm. For its 85 lb sample the lab cites 0.418 mm as quoted and 0.499 mm as measured. Those are three distinct values; the estimator uses 0.405 mm.
How much space does 112 lb take compared with 20.2 lb?
At the same fill level, the 112 lb size holds about 12% as many yards as the 20.2 lb size, based on the published millimeter diameters of 0.165 and 0.47 mm. The comparison assumes equal packing; it is not a measured fill.
Specifications & sources
Manufacturer approximate diameters; PE size is not a measured diameter. Independent measurements are limited to the samples identified here.
- VARIVAS Avani Casting PE Max Power X8 US product specifications Manufacturer size chart and spool specifications for this family.
- VARIVAS Japan: Avani Casting PE Max Power X8 Manufacturer rating terminology and family identity; diameters above use the US chart.
VARIVAS Avani Casting PE Max Power X8
Diameter chart and spool planning guide

VARIVAS Avani Casting PE Max Power X8 is an eight-strand PE braid for offshore lure casting. This guide covers 20.2 to 112 lb.
- Construction
- 8-strand PE braid
- Strength basis
- Maximum lb
- Reviewed sizes
- 10
Published diameters and spool lengths
Manufacturer approximate diameters; PE size is not a measured diameter. Independent measurements are limited to the samples identified here. PE 10 and 12 have no published US diameter and are omitted.
| PE size | Maximum lb | Diameter (in) | Diameter (mm) | Package length |
|---|---|---|---|---|
| 1 | 20.2 | 0.0065 | 0.165 | 300 m |
| 1.2 | 24.1 | 0.0073 | 0.185 | 300 m |
| 1.5 | 28.6 | 0.0081 | 0.205 | 300 m |
| 2 | 33 | 0.0093 | 0.235 | 200 m, 300 m |
| 2.5 | 40 | 0.0102 | 0.260 | 200 m, 300 m |
| 3 | 48 | 0.0112 | 0.285 | 200 m, 300 m |
| 4 | 64 | 0.0130 | 0.330 | 200 m, 300 m, 400 m |
| 5 | 78 | 0.0146 | 0.370 | 200 m, 300 m, 400 m |
| 6 | 85 | 0.0159 | 0.405 | 200 m, 300 m, 400 m |
| 8 | 112 | 0.0185 | 0.470 | 200 m, 300 m, 400 m |
Line Laboratory sample measurements
Each row describes the exact size tested. Lab quoted diameter and measured average are separate from the maker chart and are not used for the capacity estimate.
| Tested size | Lab quoted | Measured average | Source |
|---|---|---|---|
| PE 6 / 85 lb | 0.418 mm | 0.499 mm | Test details (85 lb) |
| PE 8 / 112 lb | 0.47 mm | 0.623 mm | Test details (112 lb) |
Distinguishing standard Casting X8
Look for the white offshore casting line with sight marks every 25 m. At PE 1 its US chart says 0.165 mm, while Shore Master at the same 20.2 lb rating says 0.171 mm. Choose the family before choosing the size.
This guide estimates a full spool from a printed diameter. For optional backing, open the Setup Wizard and enter the line details manually. This link does not preselect a line.
Questions about Avani Casting PE Max Power X8
Which diameter should I enter for PE 6?
The US chart prints 0.405 mm. For its 85 lb sample the lab cites 0.418 mm as quoted and 0.499 mm as measured. Those are three distinct values; the estimator uses 0.405 mm.
How much space does 112 lb take compared with 20.2 lb?
At the same fill level, the 112 lb size holds about 12% as many yards as the 20.2 lb size, based on the published millimeter diameters of 0.165 and 0.47 mm. The comparison assumes equal packing; it is not a measured fill.
Specifications & sources
Manufacturer approximate diameters; PE size is not a measured diameter. Independent measurements are limited to the samples identified here.
- VARIVAS Avani Casting PE Max Power X8 US product specifications Manufacturer size chart and spool specifications for this family.
- VARIVAS Japan: Avani Casting PE Max Power X8 Manufacturer rating terminology and family identity; diameters above use the US chart.